80 GB Installed ProLiant System BIOS - A22 (02/09/2010) Copyright 1982, 2010 Hewlett-Packard Development Company, L.P. 1 Six-Core AMD Opteron(tm) Processor 2435 @ 2.60 GHz (3 MB L2,6 MB L3) 2 Six-Core AMD Opteron(tm) Processor 2435 @ 2.60 GHz (3 MB L2,6 MB L3) Power Regulator Mode: Dynamic Power Savings Advanced Memory Protection Mode: Advanced ECC Support Redundant ROM Detected - This system contains a valid backup system ROM. Integrated Lights-Out 2 Standard iLO 2 v1.81 Jan 15 2010 10.1.103.117 Slot 3 HP Smart Array P410 Controller (512MB, v2.72) 1 Logical Drive SATA Option ROM ver 2.00.B08 Copyright 1982, 2008. Hewlett-Packard Development Company, L.P. Port1: (CD-ROM) Optiarc DVD RW AD-7561S Broadcom NetXtreme II Ethernet Boot Agent v4.4.16 Copyright (C) 2000-2008 Broadcom Corporation All rights reserved. Press Ctrl-S to Configure Device (MAC Address - 18A905502E0E) Press "F9" key for ROM-Based Setup Utility Press "F10" key for System Maintenance Menu Press "F12" key for Network Boot For access via BIOS Serial Console Press "ESC+9" for ROM-Based Setup Utility Press "ESC+0" for System Maintenance Menu Press "ESC+@" for Network Boot Booting a command listt [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-grml (mika@grmlvrs) (gcc version 4.4.3 (Debian 4.4.3-2) ) #1 SMP PREEMPT Thu Mar 4 00:30:39 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe3e000 (usable) [ 0.000000] BIOS-e820: 00000000cfe3e000 - 00000000cfe46000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe46000 - 00000000cfe47000 (usable) [ 0.000000] BIOS-e820: 00000000cfe47000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000142ffff000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xcfe47 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000001430000000 aka 82688M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfe3e000 (usable) [ 0.000000] modified: 00000000cfe3e000 - 00000000cfe46000 (ACPI data) [ 0.000000] modified: 00000000cfe46000 - 00000000cfe47000 (usable) [ 0.000000] modified: 00000000cfe47000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 000000142ffff000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f4f80] f4f80 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 376aa000 - 37fef375 [ 0.000000] Allocated new RAMDISK: 008a1000 - 011e6375 [ 0.000000] Move RAMDISK from 00000000376aa000 - 0000000037fef374 to 008a1000 - 011e6374 [ 0.000000] ACPI: RSDP 000f4f00 00024 (v02 HP ) [ 0.000000] ACPI: XSDT cfe3eec0 0009C (v01 HP ProLiant 00000002 �? 0000162E) [ 0.000000] ACPI: FACP cfe3efc0 000F4 (v03 HP ProLiant 00000002 �? 0000162E) [ 0.000000] ACPI: DSDT cfe3f0c0 0380A (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS cfe3e140 00040 [ 0.000000] ACPI: SPCR cfe3e180 00050 (v01 HP SPCRRBSU 00000001 �? 0000162E) [ 0.000000] ACPI: MCFG cfe3e200 0003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: HPET cfe3e240 00038 (v01 HP ProLiant 00000002 �? 0000162E) [ 0.000000] ACPI: SPMI cfe3e280 00040 (v05 HP ProLiant 00000001 �? 0000162E) [ 0.000000] ACPI: ERST cfe3e2c0 001D0 (v01 HP ProLiant 00000001 �? 0000162E) [ 0.000000] ACPI: APIC cfe3e4c0 000CA (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: SRAT cfe3e6c0 00190 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: FFFF cfe3eac0 00176 (v01 HP ProLiant 00000001 �? 0000162E) [ 0.000000] ACPI: BERT cfe3ec40 00030 (v01 HP ProLiant 00000001 �? 0000162E) [ 0.000000] ACPI: HEST cfe3ec80 0018C (v01 HP ProLiant 00000001 �? 0000162E) [ 0.000000] ACPI: FFFF cfe3ee40 00064 (v02 HP ProLiant 00000002 �? 0000162E) [ 0.000000] ACPI: SSDT cfe42900 002F7 (v03 HP pci0pcie 00000001 INTL 20061109) [ 0.000000] ACPI: SSDT cfe42c00 00125 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.000000] ACPI: SSDT cfe42d40 00086 (v03 HP CRSPCI1 00000002 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2438MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00016000 - 0001cf00 [ 0.000000] (14 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000100000 - 000089cb30] TEXT DATA BSS ==> [0000100000 - 000089cb30] [ 0.000000] #3 [000089d000 - 00008a00ec] BRK ==> [000089d000 - 00008a00ec] [ 0.000000] #4 [000009f400 - 00000f4f80] BIOS reserved ==> [000009f400 - 00000f4f80] [ 0.000000] #5 [00000f4f80 - 00000f4f90] MP-table mpf ==> [00000f4f80 - 00000f4f90] [ 0.000000] #6 [00000f4f90 - 00000ff91f] BIOS reserved ==> [00000f4f90 - 00000ff91f] [ 0.000000] #7 [00000ffccb - 0000100000] BIOS reserved ==> [00000ffccb - 0000100000] [ 0.000000] #8 [00000ff91f - 00000ffccb] MP-table mpc ==> [00000ff91f - 00000ffccb] [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000] [ 0.000000] #12 [00008a1000 - 00011e6375] NEW RAMDISK ==> [00008a1000 - 00011e6375] [ 0.000000] #13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cfe47 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe3e [ 0.000000] 0: 0x000cfe46 -> 0x000cfe47 [ 0.000000] On node 0 totalpages: 851408 [ 0.000000] free_area_init_node: node 0, pgdat c07375c0, node_mem_map c11e8000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3953 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4877 pages used for memmap [ 0.000000] HighMem zone: 619316 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x920 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x4 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0xc ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0x5 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0xd ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) [ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) [ 0.000000] IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1166a201 base: 0xfed00000 [ 0.000000] 12 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s34968 r0 d22376 u524288 [ 0.000000] pcpu-alloc: s34968 r0 d22376 u524288 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844755 [ 0.000000] Kernel command line: BOOT_IMAGE=(loop)/boot/grmlmedsid/linux26 quiet lang=de boot=live noeject noprompt keyboard=de isofrom=/dev/cciss/c0d0p1/boot/grml/grml.iso toram=grml-medium.squashfs serial console=ttyS0,115200n8 ssh=1234 ignore_bootid debug=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe47) [ 0.000000] Memory: 3359004k/3406108k available (4185k kernel code, 45272k reserved, 2306k data, 620k init, 2496772k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0757000 - 0xc07f2000 ( 620 kB) [ 0.000000] .data : 0xc051640f - 0xc0756e7c (2306 kB) [ 0.000000] .text : 0xc0100000 - 0xc051640f (4185 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:880 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2600.036 MHz processor. [ 0.006672] Calibrating delay loop (skipped), value calculated using timer frequency.. 5202.74 BogoMIPS (lpj=8666786) [ 0.013350] Mount-cache hash table entries: 512 [ 0.016779] Initializing cgroup subsys debug [ 0.020002] Initializing cgroup subsys ns [ 0.023336] Initializing cgroup subsys cpuacct [ 0.026670] Initializing cgroup subsys devices [ 0.030002] Initializing cgroup subsys freezer [ 0.033335] Initializing cgroup subsys net_cls [ 0.036669] Initializing cgroup subsys blkio [ 0.040022] CPU: Physical Processor ID: 0 [ 0.043335] CPU: Processor Core ID: 0 [ 0.046670] mce: CPU supports 6 MCE banks [ 0.050009] using C1E aware idle routine [ 0.053339] Performance Events: AMD PMU driver. [ 0.060004] ... version: 0 [ 0.063335] ... bit width: 48 [ 0.066668] ... generic registers: 4 [ 0.070002] ... value mask: 0000ffffffffffff [ 0.073336] ... max period: 00007fffffffffff [ 0.076668] ... fixed-purpose events: 0 [ 0.080001] ... event mask: 000000000000000f [ 0.083337] Checking 'hlt' instruction... OK. [ 0.102959] ACPI: Core revision 20091214 [ 0.112051] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.113337] ftrace: allocating 21794 entries in 43 pages [ 0.120063] Enabling APIC mode: Flat. Using 3 I/O APICs [ 0.124121] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.160590] CPU0: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 [ 0.180037] Booting Node 0, Processors #1 [ 0.009999] Initializing CPU#1 [ 0.290052] #2 [ 0.009999] Initializing CPU#2 [ 0.400063] #3 [ 0.009999] Initializing CPU#3 [ 0.506738] #4 [ 0.009999] Initializing CPU#4 [ 0.613398] #5 [ 0.009999] Initializing CPU#5 [ 0.723407] #6 [ 0.009999] Initializing CPU#6 [ 0.830073] #7 Ok. [ 0.009999] Initializing CPU#7 [ 0.926712] Brought up 8 CPUs [ 0.930002] Total of 8 processors activated (41619.34 BogoMIPS). [ 0.933462] devtmpfs: initialized [ 0.937433] regulator: core version 0.5 [ 0.940098] NET: Registered protocol family 16 [ 0.943377] EISA bus registered [ 0.944547] ACPI: bus type pci registered [ 0.946702] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000) [ 0.950003] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820 [ 0.952530] PCI: Using MMCONFIG for extended config space [ 0.953334] PCI: Using configuration type 1 for base access [ 0.963376] bio: create slab at 0 [ 0.966686] ACPI: EC: Look up EC in DSDT [ 0.970150] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20091214/dsopcode-596) [ 0.973335] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node f70102b8), AE_AML_BUFFER_LIMIT [ 0.979089] ACPI: Interpreter enabled [ 0.980004] ACPI: (supports S0 S4 S5) [ 0.981320] ACPI: Using IOAPIC for interrupt routing [ 0.997011] ACPI: No dock devices found. [ 0.998443] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.000102] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 1.003348] pci_root PNP0A03:00: host bridge window [mem 0xe8000000-0xf7ffffff] (ignored) [ 1.006668] pci_root PNP0A03:00: host bridge window [io 0x1000-0x4fff] (ignored) [ 1.009160] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored) [ 1.010001] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] (ignored) [ 1.013334] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored) [ 1.016668] pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfed03fff] (ignored) [ 1.019502] pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfed44fff] (ignored) [ 1.020001] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored) [ 1.023334] pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored) [ 1.026668] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.030069] pci 0000:00:03.0: reg 10: [mem 0xe8000000-0xefffffff pref] [ 1.032342] pci 0000:00:03.0: reg 14: [io 0x1000-0x10ff] [ 1.033339] pci 0000:00:03.0: reg 18: [mem 0xf3ef0000-0xf3efffff] [ 1.036686] pci 0000:00:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.039133] pci 0000:00:03.0: supports D1 D2 [ 1.040065] pci 0000:00:04.0: reg 10: [io 0x2800-0x28ff] [ 1.041886] pci 0000:00:04.0: reg 14: [mem 0xf3ee0000-0xf3ee01ff] [ 1.043374] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 1.046670] pci 0000:00:04.0: PME# disabled [ 1.048161] pci 0000:00:04.2: reg 10: [io 0x1400-0x14ff] [ 1.050006] pci 0000:00:04.2: reg 14: [mem 0xf3ed0000-0xf3ed07ff] [ 1.052034] pci 0000:00:04.2: reg 18: [mem 0xf3ec0000-0xf3ec3fff] [ 1.053339] pci 0000:00:04.2: reg 1c: [mem 0xf3e00000-0xf3e7ffff] [ 1.056684] pci 0000:00:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.058945] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold [ 1.060003] pci 0000:00:04.2: PME# disabled [ 1.061478] pci 0000:00:04.4: reg 20: [io 0x1800-0x181f] [ 1.063363] pci 0000:00:04.4: PME# supported from D0 D3hot D3cold [ 1.066670] pci 0000:00:04.4: PME# disabled [ 1.070065] pci 0000:00:04.6: reg 10: [mem 0xf3df0000-0xf3df00ff] [ 1.072206] pci 0000:00:04.6: PME# supported from D0 D3hot D3cold [ 1.073336] pci 0000:00:04.6: PME# disabled [ 1.074796] pci 0000:00:05.0: Enabling HT MSI Mapping [ 1.076922] pci 0000:00:07.0: reg 10: [mem 0xf3de0000-0xf3de0fff] [ 1.080006] pci 0000:00:07.0: reg 14: [io 0x1c00-0x1cff] [ 1.081943] pci 0000:00:07.1: reg 10: [mem 0xf3dd0000-0xf3dd0fff] [ 1.083339] pci 0000:00:07.1: reg 14: [io 0x3000-0x30ff] [ 1.085327] pci 0000:00:07.2: reg 10: [mem 0xf3dc0000-0xf3dc0fff] [ 1.086672] pci 0000:00:07.2: reg 14: [io 0x3400-0x34ff] [ 1.090038] pci 0000:00:07.2: supports D1 D2 [ 1.091484] pci 0000:00:07.2: PME# supported from D0 D1 D2 D3hot [ 1.093336] pci 0000:00:07.2: PME# disabled [ 1.094860] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 1.096668] pci 0000:00:0f.0: PME# disabled [ 1.098171] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 1.100001] pci 0000:00:10.0: PME# disabled [ 1.101509] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 1.103335] pci 0000:00:11.0: PME# disabled [ 1.106735] pci 0000:00:12.0: PME# supported from D0 D3hot D3cold [ 1.110002] pci 0000:00:12.0: PME# disabled [ 1.111513] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 1.113335] pci 0000:00:13.0: PME# disabled [ 1.115357] pci 0000:01:0e.0: reg 10: [io 0x4000-0x4007] [ 1.116671] pci 0000:01:0e.0: reg 14: [io 0x4008-0x400b] [ 1.120004] pci 0000:01:0e.0: reg 18: [io 0x4010-0x4017] [ 1.121849] pci 0000:01:0e.0: reg 1c: [io 0x4018-0x401b] [ 1.123338] pci 0000:01:0e.0: reg 20: [io 0x4020-0x402f] [ 1.125355] pci 0000:01:0e.0: reg 24: [mem 0xf3ff0000-0xf3ff1fff] [ 1.126670] pci 0000:01:0e.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.130034] pci 0000:00:05.0: PCI bridge to [bus 01-02] [ 1.131847] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff] [ 1.133335] pci 0000:00:05.0: bridge window [mem 0xf3f00000-0xf3ffffff] [ 1.136676] pci 0000:01:0d.0: PCI bridge to [bus 02-02] [ 1.138481] pci 0000:00:0f.0: PCI bridge to [bus 04-06] [ 1.140020] pci 0000:00:10.0: PCI bridge to [bus 07-09] [ 1.142019] pci 0000:00:11.0: PCI bridge to [bus 0a-0c] [ 1.143401] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf7ffffff 64bit] [ 1.145679] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.146694] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.150002] pci 0000:03:00.0: PME# disabled [ 1.151503] pci 0000:03:00.1: reg 10: [mem 0xf4000000-0xf5ffffff 64bit] [ 1.153352] pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.156699] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 1.158805] pci 0000:03:00.1: PME# disabled [ 1.160032] pci 0000:00:12.0: PCI bridge to [bus 03-03] [ 1.161858] pci 0000:00:12.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.163352] pci 0000:00:13.0: PCI bridge to [bus 0d-0d] [ 1.165105] pci_bus 0000:00: on NUMA node 0 [ 1.166669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.170098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT] [ 1.172310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] [ 1.173402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT] [ 1.176736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT] [ 1.178917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT] [ 1.180046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB._PRT] [ 1.186757] ACPI: PCI Root Bridge [PCI1] (0000:40) [ 1.190081] pci_root PNP0A03:01: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 1.193341] pci_root PNP0A03:01: host bridge window [mem 0xf8000000-0xfdffffff] (ignored) [ 1.196668] pci_root PNP0A03:01: host bridge window [io 0x5000-0xffff] (ignored) [ 1.200070] pci 0000:40:0f.0: PME# supported from D0 D3hot D3cold [ 1.202117] pci 0000:40:0f.0: PME# disabled [ 1.203402] pci 0000:40:10.0: PME# supported from D0 D3hot D3cold [ 1.205538] pci 0000:40:10.0: PME# disabled [ 1.206735] pci 0000:40:11.0: PME# supported from D0 D3hot D3cold [ 1.210001] pci 0000:40:11.0: PME# disabled [ 1.211607] pci 0000:40:12.0: PME# supported from D0 D3hot D3cold [ 1.213335] pci 0000:40:12.0: PME# disabled [ 1.214826] pci 0000:40:13.0: PME# supported from D0 D3hot D3cold [ 1.216668] pci 0000:40:13.0: PME# disabled [ 1.220033] pci 0000:40:0f.0: PCI bridge to [bus 42-44] [ 1.221874] pci 0000:40:10.0: PCI bridge to [bus 45-47] [ 1.223406] pci 0000:48:00.0: reg 10: [mem 0xfdc00000-0xfdffffff 64bit] [ 1.225733] pci 0000:48:00.0: reg 18: [mem 0xfdbf0000-0xfdbf0fff 64bit] [ 1.226672] pci 0000:48:00.0: reg 20: [io 0x5000-0x50ff] [ 1.230009] pci 0000:48:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 1.232239] pci 0000:48:00.0: supports D1 [ 1.233334] pci 0000:48:00.0: PME# supported from D0 [ 1.234989] pci 0000:48:00.0: PME# disabled [ 1.236694] pci 0000:40:11.0: PCI bridge to [bus 48-4a] [ 1.238543] pci 0000:40:11.0: bridge window [io 0x5000-0x5fff] [ 1.240002] pci 0000:40:11.0: bridge window [mem 0xfdb00000-0xfdffffff] [ 1.243405] pci 0000:41:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit] [ 1.245903] pci 0000:41:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.246695] pci 0000:41:00.0: PME# supported from D0 D3hot D3cold [ 1.250002] pci 0000:41:00.0: PME# disabled [ 1.251514] pci 0000:41:00.1: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] [ 1.253352] pci 0000:41:00.1: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.255631] pci 0000:41:00.1: PME# supported from D0 D3hot D3cold [ 1.256669] pci 0000:41:00.1: PME# disabled [ 1.260028] pci 0000:40:12.0: PCI bridge to [bus 41-41] [ 1.261835] pci 0000:40:12.0: bridge window [mem 0xf8000000-0xfbffffff] [ 1.263352] pci 0000:40:13.0: PCI bridge to [bus 4b-4b] [ 1.265177] pci_bus 0000:40: on NUMA node 0 [ 1.266668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] [ 1.268782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB0._PRT] [ 1.270043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB1._PRT] [ 1.273376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB2._PRT] [ 1.275597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB3._PRT] [ 1.276709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB4._PRT] [ 1.280091] ACPI: PCI Interrupt Link [IUSB] (IRQs *5) [ 1.283605] ACPI: PCI Interrupt Link [ISF0] (IRQs *14) [ 1.285701] ACPI: PCI Interrupt Link [IN00] (IRQs 7 10 11) *0, disabled. [ 1.287533] ACPI: PCI Interrupt Link [IN01] (IRQs 7 10 11) *0, disabled. [ 1.290874] ACPI: PCI Interrupt Link [IN02] (IRQs 7 10 11) *0, disabled. [ 1.296795] ACPI: PCI Interrupt Link [IN03] (IRQs 7 10 11) *0, disabled. [ 1.300831] ACPI: PCI Interrupt Link [IN04] (IRQs 7 10 11) *0, disabled. [ 1.304193] ACPI: PCI Interrupt Link [IN05] (IRQs 7 10 11) *0, disabled. [ 1.307485] ACPI: PCI Interrupt Link [IN06] (IRQs 7 10 11) *0, disabled. [ 1.310191] ACPI: PCI Interrupt Link [IN07] (IRQs 7 10 11) *0, disabled. [ 1.312646] ACPI: PCI Interrupt Link [IN08] (IRQs 7 10 11) *0, disabled. [ 1.314318] ACPI: PCI Interrupt Link [IN09] (IRQs 7 10 11) *0, disabled. [ 1.317481] ACPI: PCI Interrupt Link [IN10] (IRQs 7 10 11) *0, disabled. [ 1.320103] ACPI: PCI Interrupt Link [IN11] (IRQs 7 10 11) *0, disabled. [ 1.323029] ACPI: PCI Interrupt Link [IN12] (IRQs 7 10 11) *0, disabled. [ 1.324157] ACPI: PCI Interrupt Link [IN13] (IRQs 7 10 11) *0, disabled. [ 1.327543] ACPI: PCI Interrupt Link [IN14] (IRQs 7 10 11) *0, disabled. [ 1.330825] ACPI: PCI Interrupt Link [IN15] (IRQs 7 10 11) *0, disabled. [ 1.333980] ACPI: PCI Interrupt Link [IN16] (IRQs 7 10 *11) [ 1.336019] ACPI: PCI Interrupt Link [IN17] (IRQs 7 10 *11) [ 1.337111] ACPI: PCI Interrupt Link [IN18] (IRQs 7 10 *11) [ 1.340449] ACPI: PCI Interrupt Link [IN19] (IRQs 7 10 *11) [ 1.343637] ACPI: PCI Interrupt Link [IN20] (IRQs 7 10 *11) [ 1.345637] ACPI: PCI Interrupt Link [IN21] (IRQs 7 10 11) *0, disabled. [ 1.347534] ACPI: PCI Interrupt Link [IN22] (IRQs 7 *10 11) [ 1.350281] ACPI: PCI Interrupt Link [IN23] (IRQs *7 10 11) [ 1.352338] ACPI: PCI Interrupt Link [IN24] (IRQs 7 10 *11) [ 1.353776] ACPI: PCI Interrupt Link [IN25] (IRQs 7 10 *11) [ 1.355810] ACPI: PCI Interrupt Link [IN26] (IRQs 7 10 *11) [ 1.357111] ACPI: PCI Interrupt Link [IN27] (IRQs 7 10 11) *0, disabled. [ 1.360875] ACPI: PCI Interrupt Link [IN28] (IRQs *7 10 11) [ 1.362849] ACPI: PCI Interrupt Link [IN29] (IRQs 7 10 *11) [ 1.363836] ACPI: PCI Interrupt Link [IN30] (IRQs 7 *10 11) [ 1.366959] ACPI: PCI Interrupt Link [IN31] (IRQs 7 10 11) *0, disabled. [ 1.369394] vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none [ 1.370016] vgaarb: loaded [ 1.373414] SCSI subsystem initialized [ 1.374691] libata version 3.00 loaded. [ 1.376749] PCI: Using ACPI for IRQ routing [ 1.378226] PCI: pci_cache_line_size set to 64 bytes [ 1.380106] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.383340] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.385182] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.413377] Switching to clocksource tsc [ 1.435461] pnp: PnP ACPI init [ 1.436628] ACPI: bus type pnp registered [ 1.446776] pnp: PnP ACPI: found 12 devices [ 1.449040] ACPI: ACPI bus type pnp unregistered [ 1.450599] PnPBIOS: Disabled by ACPI PNP [ 1.452108] system 00:01: [io 0x0408-0x040f] has been reserved [ 1.454126] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.456164] system 00:01: [io 0x04d6] has been reserved [ 1.457946] system 00:01: [io 0x0310-0x0311] has been reserved [ 1.460010] system 00:01: [io 0x0900-0x09fe] has been reserved [ 1.462061] system 00:01: [io 0x0c80-0x0c83] has been reserved [ 1.464095] system 00:01: [io 0x0cd4-0x0cd7] has been reserved [ 1.466134] system 00:01: [io 0x0f50-0x0f58] has been reserved [ 1.468201] system 00:01: [io 0x0520] has been reserved [ 1.470226] system 00:01: [io 0x0580-0x059f] has been reserved [ 1.472258] system 00:01: [io 0x0700-0x0703] has been reserved [ 1.474245] system 00:01: [io 0x0c06-0x0c07] has been reserved [ 1.476279] system 00:01: [io 0x0c14] has been reserved [ 1.478121] system 00:01: [io 0x0c4a] has been reserved [ 1.479947] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 1.481980] system 00:01: [io 0x0c6c] has been reserved [ 1.483809] system 00:01: [io 0x0c6f] has been reserved [ 1.485578] system 00:01: [io 0x0ca0-0x0ca1] has been reserved [ 1.487776] system 00:01: [io 0x0ca4-0x0ca5] has been reserved [ 1.489756] system 00:01: [io 0x03f8-0x03ff] has been reserved [ 1.491824] system 00:01: [mem 0xd0000000-0xdfffffff] has been reserved [ 1.530063] pci 0000:00:05.0: BAR 15: assigned [mem 0xe0000000-0xe00fffff pref] [ 1.533108] pci 0000:00:12.0: BAR 15: assigned [mem 0xe0100000-0xe01fffff pref] [ 1.536081] pci 0000:00:03.0: BAR 6: assigned [mem 0xe0200000-0xe021ffff pref] [ 1.538754] pci 0000:00:04.2: BAR 6: assigned [mem 0xe0220000-0xe022ffff pref] [ 1.541246] pci 0000:01:0e.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref] [ 1.543769] pci 0000:01:0d.0: PCI bridge to [bus 02-02] [ 1.545564] pci 0000:01:0d.0: bridge window [io disabled] [ 1.547465] pci 0000:01:0d.0: bridge window [mem disabled] [ 1.549358] pci 0000:01:0d.0: bridge window [mem pref disabled] [ 1.551446] pci 0000:00:05.0: PCI bridge to [bus 01-02] [ 1.553205] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff] [ 1.555246] pci 0000:00:05.0: bridge window [mem 0xf3f00000-0xf3ffffff] [ 1.557777] pci 0000:00:05.0: bridge window [mem 0xe0000000-0xe00fffff pref] [ 1.560248] pci 0000:00:0f.0: PCI bridge to [bus 04-06] [ 1.562062] pci 0000:00:0f.0: bridge window [io disabled] [ 1.564043] pci 0000:00:0f.0: bridge window [mem disabled] [ 1.566024] pci 0000:00:0f.0: bridge window [mem pref disabled] [ 1.568116] pci 0000:00:10.0: PCI bridge to [bus 07-09] [ 1.569862] pci 0000:00:10.0: bridge window [io disabled] [ 1.571761] pci 0000:00:10.0: bridge window [mem disabled] [ 1.573868] pci 0000:00:10.0: bridge window [mem pref disabled] [ 1.575932] pci 0000:00:11.0: PCI bridge to [bus 0a-0c] [ 1.577735] pci 0000:00:11.0: bridge window [io disabled] [ 1.579632] pci 0000:00:11.0: bridge window [mem disabled] [ 1.581521] pci 0000:00:11.0: bridge window [mem pref disabled] [ 1.583603] pci 0000:03:00.0: BAR 6: assigned [mem 0xe0100000-0xe010ffff pref] [ 1.586045] pci 0000:03:00.1: BAR 6: assigned [mem 0xe0110000-0xe011ffff pref] [ 1.588502] pci 0000:00:12.0: PCI bridge to [bus 03-03] [ 1.590465] pci 0000:00:12.0: bridge window [io disabled] [ 1.592406] pci 0000:00:12.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 1.594768] pci 0000:00:12.0: bridge window [mem 0xe0100000-0xe01fffff pref] [ 1.597276] pci 0000:00:13.0: PCI bridge to [bus 0d-0d] [ 1.599108] pci 0000:00:13.0: bridge window [io disabled] [ 1.601010] pci 0000:00:13.0: bridge window [mem disabled] [ 1.602907] pci 0000:00:13.0: bridge window [mem pref disabled] [ 1.605025] alloc irq_desc for 42 on node -1 [ 1.606515] alloc kstat_irqs on node -1 [ 1.608069] pci 0000:00:0f.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42 [ 1.610381] pci 0000:00:0f.0: setting latency timer to 64 [ 1.612194] alloc irq_desc for 38 on node -1 [ 1.613667] alloc kstat_irqs on node -1 [ 1.615067] pci 0000:00:10.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 [ 1.617315] pci 0000:00:10.0: setting latency timer to 64 [ 1.619121] alloc irq_desc for 39 on node -1 [ 1.620641] alloc kstat_irqs on node -1 [ 1.622070] pci 0000:00:11.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 [ 1.624364] pci 0000:00:11.0: setting latency timer to 64 [ 1.626368] alloc irq_desc for 40 on node -1 [ 1.627690] alloc kstat_irqs on node -1 [ 1.629316] pci 0000:00:12.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.631664] pci 0000:00:12.0: setting latency timer to 64 [ 1.633471] alloc irq_desc for 41 on node -1 [ 1.634956] alloc kstat_irqs on node -1 [ 1.636305] pci 0000:00:13.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41 [ 1.638609] pci 0000:00:13.0: setting latency timer to 64 [ 1.640455] pci 0000:40:11.0: BAR 15: assigned [mem 0xe0300000-0xe03fffff pref] [ 1.643105] pci 0000:40:12.0: BAR 15: assigned [mem 0xe0400000-0xe04fffff pref] [ 1.645543] pci 0000:40:0f.0: PCI bridge to [bus 42-44] [ 1.647363] pci 0000:40:0f.0: bridge window [io disabled] [ 1.649250] pci 0000:40:0f.0: bridge window [mem disabled] [ 1.651142] pci 0000:40:0f.0: bridge window [mem pref disabled] [ 1.653231] pci 0000:40:10.0: PCI bridge to [bus 45-47] [ 1.655080] pci 0000:40:10.0: bridge window [io disabled] [ 1.657735] pci 0000:40:10.0: bridge window [mem disabled] [ 1.659866] pci 0000:40:10.0: bridge window [mem pref disabled] [ 1.661990] pci 0000:48:00.0: BAR 6: assigned [mem 0xe0300000-0xe037ffff pref] [ 1.664435] pci 0000:40:11.0: PCI bridge to [bus 48-4a] [ 1.666223] pci 0000:40:11.0: bridge window [io 0x5000-0x5fff] [ 1.668259] pci 0000:40:11.0: bridge window [mem 0xfdb00000-0xfdffffff] [ 1.670572] pci 0000:40:11.0: bridge window [mem 0xe0300000-0xe03fffff pref] [ 1.673070] pci 0000:41:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref] [ 1.675483] pci 0000:41:00.1: BAR 6: assigned [mem 0xe0410000-0xe041ffff pref] [ 1.678043] pci 0000:40:12.0: PCI bridge to [bus 41-41] [ 1.679837] pci 0000:40:12.0: bridge window [io disabled] [ 1.681732] pci 0000:40:12.0: bridge window [mem 0xf8000000-0xfbffffff] [ 1.684034] pci 0000:40:12.0: bridge window [mem 0xe0400000-0xe04fffff pref] [ 1.686504] pci 0000:40:13.0: PCI bridge to [bus 4b-4b] [ 1.688314] pci 0000:40:13.0: bridge window [io disabled] [ 1.690250] pci 0000:40:13.0: bridge window [mem disabled] [ 1.692212] pci 0000:40:13.0: bridge window [mem pref disabled] [ 1.694472] alloc irq_desc for 36 on node -1 [ 1.696011] alloc kstat_irqs on node -1 [ 1.697360] pci 0000:40:0f.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 [ 1.699632] pci 0000:40:0f.0: setting latency timer to 64 [ 1.701485] alloc irq_desc for 32 on node -1 [ 1.702962] alloc kstat_irqs on node -1 [ 1.704344] pci 0000:40:10.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 1.706625] pci 0000:40:10.0: setting latency timer to 64 [ 1.708429] alloc irq_desc for 33 on node -1 [ 1.709903] alloc kstat_irqs on node -1 [ 1.711427] pci 0000:40:11.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 [ 1.713667] pci 0000:40:11.0: setting latency timer to 64 [ 1.715457] alloc irq_desc for 34 on node -1 [ 1.716993] alloc kstat_irqs on node -1 [ 1.718403] pci 0000:40:12.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [ 1.720743] pci 0000:40:12.0: setting latency timer to 64 [ 1.722536] alloc irq_desc for 35 on node -1 [ 1.724052] alloc kstat_irqs on node -1 [ 1.725437] pci 0000:40:13.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 [ 1.727770] pci 0000:40:13.0: setting latency timer to 64 [ 1.729704] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.731559] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 1.733725] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.735568] pci_bus 0000:01: resource 1 [mem 0xf3f00000-0xf3ffffff] [ 1.737765] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff pref] [ 1.739990] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf7ffffff] [ 1.742085] pci_bus 0000:03: resource 2 [mem 0xe0100000-0xe01fffff pref] [ 1.744364] pci_bus 0000:40: resource 0 [io 0x0000-0xffff] [ 1.746396] pci_bus 0000:40: resource 1 [mem 0x00000000-0xffffffff] [ 1.748549] pci_bus 0000:48: resource 0 [io 0x5000-0x5fff] [ 1.750473] pci_bus 0000:48: resource 1 [mem 0xfdb00000-0xfdffffff] [ 1.752663] pci_bus 0000:48: resource 2 [mem 0xe0300000-0xe03fffff pref] [ 1.754910] pci_bus 0000:41: resource 1 [mem 0xf8000000-0xfbffffff] [ 1.757083] pci_bus 0000:41: resource 2 [mem 0xe0400000-0xe04fffff pref] [ 1.759421] NET: Registered protocol family 2 [ 1.760968] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.764280] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.767346] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.769911] TCP: Hash tables configured (established 131072 bind 65536) [ 1.772153] TCP reno registered [ 1.773191] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.775266] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.777477] NET: Registered protocol family 1 [ 1.778970] pci 0000:00:03.0: Boot video device [ 1.780700] pci 0000:00:04.4: HCRESET not completed yet! [ 1.784392] pci 0000:00:06.0: disabled boot interrupts on device [1166:0205] [ 1.813424] PCI: CLS 64 bytes, default 64 [ 1.815013] Trying to unpack rootfs image as initramfs... [ 2.044270] Freeing initrd memory: 9492k freed [ 2.055341] Scanning for low memory corruption every 60 seconds [ 2.058355] highmem bounce pool size: 64 pages [ 2.059879] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.067207] VFS: Disk quotas dquot_6.5.2 [ 2.069163] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.073230] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2.080354] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2.087649] SGI XFS Quota Management subsystem [ 2.090766] aufs 2-33-rcN [ 2.093380] msgmni has been set to 1705 [ 2.096204] alg: No test for lzma (lzma-generic) [ 2.097985] alg: No test for stdrng (krng) [ 2.099653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 2.105973] io scheduler noop registered [ 2.107273] io scheduler deadline registered [ 2.109051] io scheduler cfq registered (default) [ 2.110990] pcieport 0000:00:0f.0: setting latency timer to 64 [ 2.113065] alloc irq_desc for 48 on node -1 [ 2.114290] alloc kstat_irqs on node -1 [ 2.115917] pcieport 0000:00:0f.0: irq 48 for MSI/MSI-X [ 2.117990] pcieport 0000:00:10.0: setting latency timer to 64 [ 2.120069] alloc irq_desc for 49 on node -1 [ 2.121297] alloc kstat_irqs on node -1 [ 2.122948] pcieport 0000:00:10.0: irq 49 for MSI/MSI-X [ 2.124927] pcieport 0000:00:11.0: setting latency timer to 64 [ 2.127020] alloc irq_desc for 50 on node -1 [ 2.128511] alloc kstat_irqs on node -1 [ 2.129904] pcieport 0000:00:11.0: irq 50 for MSI/MSI-X [ 2.131896] pcieport 0000:00:12.0: setting latency timer to 64 [ 2.134001] alloc irq_desc for 51 on node -1 [ 2.135555] alloc kstat_irqs on node -1 [ 2.136957] pcieport 0000:00:12.0: irq 51 for MSI/MSI-X [ 2.138942] pcieport 0000:00:13.0: setting latency timer to 64 [ 2.141073] alloc irq_desc for 52 on node -1 [ 2.142562] alloc kstat_irqs on node -1 [ 2.143970] pcieport 0000:00:13.0: irq 52 for MSI/MSI-X [ 2.145997] pcieport 0000:40:0f.0: setting latency timer to 64 [ 2.148035] alloc irq_desc for 53 on node -1 [ 2.149574] alloc kstat_irqs on node -1 [ 2.150973] pcieport 0000:40:0f.0: irq 53 for MSI/MSI-X [ 2.153043] pcieport 0000:40:10.0: setting latency timer to 64 [ 2.155176] alloc irq_desc for 54 on node -1 [ 2.156674] alloc kstat_irqs on node -1 [ 2.158068] pcieport 0000:40:10.0: irq 54 for MSI/MSI-X [ 2.160105] pcieport 0000:40:11.0: setting latency timer to 64 [ 2.162180] alloc irq_desc for 55 on node -1 [ 2.163681] alloc kstat_irqs on node -1 [ 2.165065] pcieport 0000:40:11.0: irq 55 for MSI/MSI-X [ 2.167155] pcieport 0000:40:12.0: setting latency timer to 64 [ 2.169224] alloc irq_desc for 56 on node -1 [ 2.170462] alloc kstat_irqs on node -1 [ 2.172116] pcieport 0000:40:12.0: irq 56 for MSI/MSI-X [ 2.174161] pcieport 0000:40:13.0: setting latency timer to 64 [ 2.176227] alloc irq_desc for 57 on node -1 [ 2.177469] alloc kstat_irqs on node -1 [ 2.179113] pcieport 0000:40:13.0: irq 57 for MSI/MSI-X [ 2.181234] aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support [ 2.184041] aer 0000:00:10.0:pcie02: AER service couldn't init device: no _OSC support [ 2.186723] aer 0000:00:11.0:pcie02: AER service couldn't init device: no _OSC support [ 2.189370] aer 0000:00:12.0:pcie02: AER service couldn't init device: no _OSC support [ 2.192158] aer 0000:00:13.0:pcie02: AER service couldn't init device: no _OSC support [ 2.194860] aer 0000:40:0f.0:pcie02: AER service couldn't init device: no _OSC support [ 2.199543] aer 0000:40:10.0:pcie02: AER service couldn't init device: no _OSC support [ 2.202248] aer 0000:40:11.0:pcie02: AER service couldn't init device: no _OSC support [ 2.204983] aer 0000:40:12.0:pcie02: AER service couldn't init device: no _OSC support [ 2.207687] aer 0000:40:13.0:pcie02: AER service couldn't init device: no _OSC support [ 2.210778] pci-stub: invalid id string "" [ 2.212807] isapnp: Scanning for PnP cards... [ 2.571808] isapnp: No Plug & Play device found [ 2.582820] Linux agpgart interface v0.103 [ 2.585003] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled [ 2.587303] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.589695] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.592775] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.601207] brd: module loaded [ 2.602583] Compaq SMART2 Driver (v 2.6.0) [ 2.604230] HP CISS Driver (v 3.6.20) [ 2.605805] cciss 0000:48:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 [ 2.608249] alloc irq_desc for 58 on node -1 [ 2.610063] alloc kstat_irqs on node -1 [ 2.611406] cciss 0000:48:00.0: irq 58 for MSI/MSI-X [ 2.613143] alloc irq_desc for 59 on node -1 [ 2.614711] alloc kstat_irqs on node -1 [ 2.616061] cciss 0000:48:00.0: irq 59 for MSI/MSI-X [ 2.617717] alloc irq_desc for 60 on node -1 [ 2.619185] alloc kstat_irqs on node -1 [ 2.620576] cciss 0000:48:00.0: irq 60 for MSI/MSI-X [ 2.622310] alloc irq_desc for 61 on node -1 [ 2.623840] alloc kstat_irqs on node -1 [ 2.625231] cciss 0000:48:00.0: irq 61 for MSI/MSI-X [ 2.630412] IRQ 60/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs [ 2.633883] cciss0: <0x323a> at PCI 0000:48:00.0 IRQ 60 using DAC [ 2.639291] cciss/c0d0: p1 p2 < p5 > [ 2.642512] sata_svw 0000:01:0e.0: version 2.3 [ 2.644424] ACPI: PCI Interrupt Link [ISF0] enabled at IRQ 14 [ 2.646474] sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14 (level, low) -> IRQ 14 [ 2.649514] scsi0 : sata_svw [ 2.650849] scsi1 : sata_svw [ 2.652224] scsi2 : sata_svw [ 2.653581] scsi3 : sata_svw [ 2.656706] ata1: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0000 irq 14 [ 2.659796] ata2: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0100 irq 14 [ 2.662351] ata3: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0200 irq 14 [ 2.664943] ata4: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0300 irq 14 [ 2.672533] Fixed MDIO Bus: probed [ 2.677871] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 2.682255] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.684019] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.686125] mice: PS/2 mouse device common for all mice [ 2.688262] md: linear personality registered for level -1 [ 2.691382] md: raid0 personality registered for level 0 [ 2.693194] md: raid1 personality registered for level 1 [ 2.695057] md: raid10 personality registered for level 10 [ 2.696974] md: multipath personality registered for level -4 [ 2.699258] device-mapper: uevent: version 1.0.3 [ 2.701279] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com [ 2.707769] EISA: Probing bus 0 at eisa.0 [ 2.709232] EISA: Cannot allocate resource for mainboard [ 2.711095] Cannot allocate resource for EISA slot 1 [ 2.712800] Cannot allocate resource for EISA slot 2 [ 2.714461] Cannot allocate resource for EISA slot 3 [ 2.716156] Cannot allocate resource for EISA slot 4 [ 2.717903] Cannot allocate resource for EISA slot 5 [ 2.719604] EISA: Detected 0 cards. [ 2.720818] cpuidle: using governor ladder [ 2.722183] cpuidle: using governor menu [ 2.723979] TCP cubic registered [ 2.725203] NET: Registered protocol family 15 [ 2.726931] Using IPI No-Shortcut mode [ 2.728576] registered taskstats version 1 [ 2.730159] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.730511] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 2.730540] Initalizing network drop monitor service [ 2.867368] psmouse serio1: ID: 10 00 64 [ 2.924816] logips2pp: Detected unknown logitech mouse model 2 [ 2.986747] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.010288] ata1.00: ATAPI: Optiarc DVD RW AD-7561S, AH52, max UDMA/100 [ 3.040325] ata1.00: configured for UDMA/100 [ 3.044696] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH52 PQ: 0 ANSI: 5 [ 3.053955] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.056528] Uniform CD-ROM driver Revision: 3.20 [ 3.058495] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.225000] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 3.390921] ata2: SATA link down (SStatus 4 SControl 300) [ 3.720926] ata3: SATA link down (SStatus 4 SControl 300) [ 4.050925] ata4: SATA link down (SStatus 4 SControl 300) [ 4.063481] Freeing unused kernel memory: 620k freed [ 4.065900] Write protecting the kernel text: 4188k [ 4.067721] Write protecting the kernel read-only data: 1868k Loading, please wait... + [ -z ] + export resume= + depmod -a + maybe_break top + [ = top ] + run_scripts /scripts/init-top + initdir=/scripts/init-top + [ ! -d /scripts/init-top ] + get_prereqs + set_initlist + unset initlist + [ /scripts/init-top/all_generic_ide = /scripts/init-top/* ] + [ ! -x /scripts/init-top/all_generic_ide ] + [ -d /scripts/init-top/all_generic_ide ] + initlist= all_generic_ide + [ /scripts/init-top/grml = /scripts/init-top/* ] + [ ! -x /scripts/init-top/grml ] + [ -d /scripts/init-top/grml ] + initlist= all_generic_ide grml + [ /scripts/init-top/keymap = /scripts/init-top/* ] + [ ! -x /scripts/init-top/keymap ] + [ -d /scripts/init-top/keymap ] + initlist= all_gener[ 4.243595] squashfs: version 4.0 (2009/01/31) Phillip Lougher ic_ide grml keymap + /scripts/init-top/all_generic_ide prereqs + tmp= + eval array_all_generic_ide="" + array_all_generic_ide= + /scripts/init-top/grml prereqs + tmp= + eval array_grml="" + array_grml= + /scripts/init-top/keymap prereqs + tmp= + eval array_keymap="" + array_keymap= + reduce_prereqs + unset runlist + set -- all_generic_ide grml keymap + i=3 + [ 3 -ne 0 ] + oldi=3 + reduce_satisfied all_generic_ide + render array_all_generic_ide + eval echo -n ${array_all_generic_ide} + echo -n + deplist= + unset tmpdeplist + deplist= + eval array_all_generic_ide="" + array_all_generic_ide= + render array_all_generic_ide + eval echo -n ${array_all_generic_ide} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= all_generic_ide + pop_list_item all_generic_ide all_generic_ide grml keymap + item=all_generic_ide + shift + set -- all_generic_ide grml keymap + unset tmppop + [ all_generic_ide = all_generic_ide ] + continue + [ grml = all_generic_ide ] + tmppop= grml + [ keymap = all_generic_ide ] + tmppop= grml keymap + initlist= grml keymap + i=2 + reduce_satisfied grml + render array_grml + eval echo -n ${array_grml} + echo -n + deplist= + unset tmpdeplist + deplist= + pop_list_item all_generic_ide + item=all_generic_ide + shift + set -- + unset tmppop + deplist= + eval array_grml="" + array_grml= + render array_grml + eval echo -n ${array_grml} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= all_generic_ide grml + pop_list_item grml grml keymap + item=grml + shift + set -- grml keymap + unset tmppop + [ grml = grml ] + continue + [ keymap = grml ] + tmppop= keymap + initlist= keymap + i=1 + reduce_satisfied keymap + render array_keymap + eval echo -n ${array_keymap} + echo -n + deplist= + unset tmpdeplist + deplist= + pop_list_item all_generic_ide + item=all_generic_ide + shift + set -- + unset tmppop + deplist= + pop_list_item grml + item=grml + shift + set -- + unset tmppop + deplist= + eval array_keymap="" + array_keymap= + render array_keymap + eval echo -n ${array_keymap} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= all_generic_ide grml keymap + pop_list_item keymap keymap + item=keymap + shift + set -- keymap + unset tmppop + [ keymap = keymap ] + continue + initlist= + i=0 + [ 0 -eq 3 ] + [ 0 -ne 0 ] + call_scripts + [ = y ] + /scripts/init-top/all_generic_ide + [ -e /conf/param.conf ] + [ = y ] + /scripts/init-top/grml debug: scripts/init-top/grml running Welcome to ____ ____ __ __ _ / ___| _ \| \/ | | | | _| |_) | |\/| | | | |_| | _ <| | | | |___ \____|_| \_\_| |_|_____| grml.org - Linux for sysadmins and texttool users. * Running grml-med-sid 2010.03.11 Release Codename i-need-beer [2010-03-11] * Finished early booting sequence. [ ok ] * Searching for GRML file, this might take a few seconds... + [ -e /conf/param.conf ] + [ = y ] + /scripts/init-top/keymap + [ -e /conf/param.conf ] + maybe_break modules + [ = modules ] + log_begin_msg Loading essential drivers + [ -x /sbin/usplash_write ] + _log_msg Begin: Loading essential drivers ... + [ n = y ] + printf Begin: Loading essential drivers ... Begin: Loading essential drivers ... + load_modules + [ -e /conf/modules ] + cat /conf/modules + read m + [ -z dm-mod ] + printf %.1s dm-mod + com=d + [ d = # ] + modprobe dm-mod + read m + [ -z dm-mirror ] + printf %.1s dm-mirror + com=d + [ d = # ] + modprobe dm-mirror + read m + [ -z dm-raid45 ] + printf %.1s dm-raid45 + com=d + [ d = # ] + modprobe dm-raid45 + read m + [ -z unix ] + printf %.1s unix + com=u + [ u = # ] + modprobe unix + read m + log_end_msg + [ -x /sbin/usplash_write ] + _log_msg done.\n + [ n = y ] + printf done.\n done. + maybe_break premount + [ = premount ] + [ n != y ] + log_begin_msg Running /scripts/init-premount + [ -x /sbin/usplash_write ] + _log_msg Begin: Running /scripts/init-premount ... + [ n = y ] + printf Begin: Running /scripts/init-premount ... Begin: Running /scripts/init-premount ... + run_scripts /scripts/init-premount + initdir=/scripts/init-premount + [ ! -d /scripts/init-premount ] + get_prereqs + set_initlist + unset initlist + [ /scripts/init-premount/blacklist = /scripts/init-premount/* ] + [ ! -x /scripts/init-premount/blacklist ] + [ -d /scripts/init-premount/blacklist ] + initlist= blacklist + [ /scripts/init-premount/select_eth_device = /scripts/init-premount/* ] + [ ! -x /scripts/init-premount/select_eth_device ] + [ -d /scripts/init-premount/select_eth_device ] + initlist= blacklist select_eth_device + [ /scripts/init-premount/udev = /scripts/init-premount/* ] + [ ! -x /scripts/init-premount/udev ] + [ -d /scripts/init-premount/udev ] + initlist= blacklist select_eth_device udev + /scripts/init-premount/blacklist prereqs + tmp= + eval array_blacklist="" + array_blacklist= + /scripts/init-premount/select_eth_device prereqs + tmp=blacklist udev + eval array_select_eth_device="blacklist udev" + array_select_eth_device=blacklist udev + /scripts/init-premount/udev prereqs + tmp= + eval array_udev="" + array_udev= + reduce_prereqs + unset runlist + set -- blacklist select_eth_device udev + i=3 + [ 3 -ne 0 ] + oldi=3 + reduce_satisfied blacklist + render array_blacklist + eval echo -n ${array_blacklist} + echo -n + deplist= + unset tmpdeplist + deplist= + eval array_blacklist="" + array_blacklist= + render array_blacklist + eval echo -n ${array_blacklist} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= blacklist + pop_list_item blacklist blacklist select_eth_device udev + item=blacklist + shift + set -- blacklist select_eth_device udev + unset tmppop + [ blacklist = blacklist ] + continue + [ select_eth_device = blacklist ] + tmppop= select_eth_device + [ udev = blacklist ] + tmppop= select_eth_device udev + initlist= select_eth_device udev + i=2 + reduce_satisfied select_eth_device + render array_select_eth_device + eval echo -n ${array_select_eth_device} + echo -n blacklist udev + deplist=blacklist udev + unset tmpdeplist + [ ! -x /scripts/init-premount/blacklist ] + [ -d /scripts/init-premount/blacklist ] + tmpdeplist= blacklist + [ ! -x /scripts/init-premount/udev ] + [ -d /scripts/init-premount/udev ] + tmpdeplist= blacklist udev + deplist= blacklist udev + pop_list_item blacklist blacklist udev + item=blacklist + shift + set -- blacklist udev + unset tmppop + [ blacklist = blacklist ] + continue + [ udev = blacklist ] + tmppop= udev + deplist= udev + eval array_select_eth_device=" udev" + array_select_eth_device= udev + render array_select_eth_device + eval echo -n ${array_select_eth_device} + echo -n udev + count_unsatisfied udev + set -- udev + return 1 + cnt=1 + [ 1 -eq 0 ] + reduce_satisfied udev + render array_udev + eval echo -n ${array_udev} + echo -n + deplist= + unset tmpdeplist + deplist= + pop_list_item blacklist + item=blacklist + shift + set -- + unset tmppop + deplist= + eval array_udev="" + array_udev= + render array_udev + eval echo -n ${array_udev} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= blacklist udev + pop_list_item udev select_eth_device udev + item=udev + shift + set -- select_eth_device udev + unset tmppop + [ select_eth_device = udev ] + tmppop= select_eth_device + [ udev = udev ] + continue + initlist= select_eth_device + i=1 + [ 1 -eq 3 ] + [ 1 -ne 0 ] + oldi=1 + reduce_satisfied select_eth_device + render array_select_eth_device + eval echo -n ${array_select_eth_device} + echo -n udev + deplist=udev + unset tmpdeplist + [ ! -x /scripts/init-premount/udev ] + [ -d /scripts/init-premount/udev ] + tmpdeplist= udev + deplist= udev + pop_list_item blacklist udev + item=blacklist + shift + set -- udev + unset tmppop + [ udev = blacklist ] + tmppop= udev + deplist= udev + pop_list_item udev udev + item=udev + shift + set -- udev + unset tmppop + [ udev = udev ] + continue + deplist= + eval array_select_eth_device="" + array_select_eth_device= + render array_select_eth_device + eval echo -n ${array_select_eth_device} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= blacklist udev select_eth_device + pop_list_item select_eth_device select_eth_device + item=select_eth_device + shift + set -- select_eth_device + unset tmppop + [ select_eth_device = select_eth_device ] + continue + initlist= + i=0 + [ 0 -eq 1 ] + [ 0 -ne 0 ] + call_scripts + [ = y ] + /scripts/init-premount/blacklist + [ -e /conf/param.conf ] + [ = y ] + /scripts/init-premount/udev [ 4.889443] usbcore: registered new interface driver usbfs [ 4.891523] usbcore: registered new interface driver hub [ 4.894517] usbcore: registered new device driver usb [ 4.896323] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.3 (Dec 03, 2009) [ 4.896360] bnx2 0000:03:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 4.896380] bnx2 0000:03:00.0: setting latency timer to 64 [ 4.896795] bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 4.902335] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.903651] bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 4.910619] eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 40, node addr 18:a9:05:50:2e:12 [ 4.914900] bnx2 0000:03:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39 [ 4.917244] bnx2 0000:03:00.1: setting latency timer to 64 [ 4.919516] bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 4.919878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.920557] ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 5 [ 4.920580] ehci_hcd 0000:00:07.2: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 [ 4.920626] ehci_hcd 0000:00:07.2: EHCI Host Controller [ 4.920676] ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 4.940686] bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 4.944446] ehci_hcd 0000:00:07.2: irq 5, io mem 0xf3dc0000 [ 4.950820] eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express f ound at mem f4000000, IRQ 39, node addr 18:a9:05:50:2e:14 [ 4.954421] ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00 [ 4.954470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.954477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.954483] usb usb1: Product: EHCI Host Controller [ 4.954487] usb usb1: Manufacturer: Linux 2.6.33-grml ehci_hcd [ 4.954493] usb usb1: SerialNumber: 0000:00:07.2 [ 4.954740] hub 1-0:1.0: USB hub found [ 4.954750] hub 1-0:1.0: 4 ports detected [ 4.961683] uhci_hcd: USB Universal Host Controller Interface driver [ 4.961790] alloc irq_desc for 45 on node -1 [ 4.961795] alloc kstat_irqs on node -1 [ 4.961814] uhci_hcd 0000:00:04.4: PCI INT B -> GSI 45 (level, low) -> IRQ 45 [ 4.961829] uhci_hcd 0000:00:04.4: UHCI Host Controller [ 4.961849] uhci_hcd 0000:00:04.4: new USB bus registered, assigned bus number 2 [ 4.961872] uhci_hcd 0000:00:04.4: port count misdetected? forcing to 2 ports [ 4.961892] uhci_hcd 0000:00:04.4: HCRESET not completed yet! [ 4.961932] uhci_hcd 0000:00:04.4: irq 45, io base 0x00001800 [ 4.962014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.962021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.962026] usb usb2: Product: UHCI Host Controller [ 4.962030] usb usb2: Manufacturer: Linux 2.6.33-grml uhci_hcd [ 4.962035] usb usb2: SerialNumber: 0000:00:04.4 [ 4.962246] hub 2-0:1.0: USB hub found [ 4.962256] hub 2-0:1.0: 2 ports detected [ 4.999942] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.000004] ohci_hcd 0000:00:07.0: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 [ 5.000033] ohci_hcd 0000:00:07.0: OHCI Host Controller [ 5.000052] ohci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 3 [ 5.000082] ohci_hcd 0000:00:07.0: irq 5, io mem 0xf3de0000 [ 5.016722] bnx2 0000:41:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [ 5.020057] bnx2 0000:41:00.0: setting latency timer to 64 [ 5.022581] bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 5.031999] bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 5.041692] eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 34, node addr 18:a9:05:50:2e:0e [ 5.046294] bnx2 0000:41:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 [ 5.048964] bnx2 0000:41:00.1: setting latency timer to 64 [ 5.051402] bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 5.054719] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.057237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.059841] usb usb3: Product: OHCI Host Controller [ 5.060765] bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 5.064596] usb usb3: Manufacturer: Linux 2.6.33-grml ohci_hcd [ 5.066793] usb usb3: SerialNumber: 0000:00:07.0 [ 5.067679] eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 33, node addr 18:a9:05:50:2e:10 [ 5.073307] hub 3-0:1.0: USB hub found [ 5.074830] hub 3-0:1.0: 2 ports detected [ 5.076407] ohci_hcd 0000:00:07.1: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 [ 5.079483] ohci_hcd 0000:00:07.1: OHCI Host Controller [ 5.081468] ohci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 4 [ 5.084275] ohci_hcd 0000:00:07.1: irq 5, io mem 0xf3dd0000 [ 5.140758] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.144037] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.146724] usb usb4: Product: OHCI Host Controller [ 5.148491] usb usb4: Manufacturer: Linux 2.6.33-grml ohci_hcd [ 5.150634] usb usb4: SerialNumber: 0000:00:07.1 [ 5.152444] hub 4-0:1.0: USB hub found [ 5.153881] hub 4-0:1.0: 2 ports detected + [ -e /conf/param.conf ] + [ = y ] + /scripts/init-premount/select_eth_device + [ -e /conf/param.conf ] + [ n != y ] + log_end_msg + [ -x /sbin/usplash_write ] + _log_msg done.\n + [ n = y ] + printf done.\n done. + maybe_break mount + [ = mount ] + log_begin_msg Mounting root file system + [ -x /sbin/usplash_write ] + _log_msg Begin: Mounting root file system ... + [ n = y ] + printf Begin: Mounting root file system ... Begin: Mounting root file system ... + . /scripts/live + export PATH=/root/usr/bin:/root/usr/sbin:/root/bin:/root/sbin:/usr/bin:/usr/sbin:/bin:/sbin + echo /root/lib + echo /root/usr/lib + mountpoint=/live/image + LIVE_MEDIA_PATH=live + root_persistence=live-rw + home_persistence=home-rw + root_snapshot_label=live-sn + home_snapshot_label=home-sn + USERNAME=user + USERFULLNAME=Live user + HOSTNAME=host + mkdir -p /live/image + [ ! -d /etc ] + [ ! -f /etc/mtab ] + touch /etc/mtab + [ -f /etc/live.conf ] + . /etc/live.conf + export BUILD_SYSTEM=Debian + export USERNAME=grml + export USERFULLNAME=grml user + export HOSTNAME=grml + export SELINUX_INIT=No + export UNIONTYPE=aufs + export USERNAME USERFULLNAME HOSTNAME + . /scripts/live-helpers + [ ! -x /bin/fstype ] + [ -x /s[ 5.366724] usb 2-1: new full speed USB device using uhci_hcd and address 2 bin/udevadm ] + udevinfo=/sbin/udevadm info + [ ! -f /live.vars ] + touch /live.vars + parse_numeric + return + maybe_break mountroot + [ = mountroot ] + mountroot + [ -x /scripts/local-top/cryptroot ] + /scripts/local-top/cryptroot + exec + exec + exec + exec + tailpid=1365 + . /scripts/live-functions + tail+ -f. live.log /scripts/functions [ 5.424103] kjournald starting. Commit interval 5 seconds [ 5.424233] EXT3-fs (cciss/c0d0p1): using internal journal [ 5.424242] EXT3-fs (cciss/c0d0p1): recovery complete [ 5.424251] EXT3-fs (cciss/c0d0p1): mounted filesystem with writeback data mode [ 5.444682] loop: module loaded [ 5.513813] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 5.516251] ISO 9660 Extensions: [ 5.516828] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027 [ 5.516836] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.516842] usb 2-1: Product: Virtual Keyboard [ 5.516846] usb 2-1: Manufacturer: HP [ 5.527370] RRIP_1991A [ 5.537851] usbcore: registered new interface driver hiddev [ 5.545606] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb2/2-1/2-1:1.0/input/input2 [ 5.549942] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:00:04.4-1/input0 [ 5.559558] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb2/2-1/2-1:1.1/input/input3 [ 5.563540] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:00:04.4-1/input1 [ 5.569071] usbcore: registered new interface driver usbhid [ 5.571107] usbhid: USB HID core driver * Mounted live system from /dev/loop0 [ 5.683685] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 5.862794] usb 4-1: not running at top speed; connect to a high speed hub [ 5.868806] usb 4-1: New USB device found, idVendor=04b4, idProduct=6560 [ 5.871386] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.874889] hub 4-1:1.0: USB hub found [ 5.876803] hub 4-1:1.0: 4 ports detected + kill 1365 + [ -w /root/var/log/ ] + log_end_msg + [ -x /sbin/usplash_write ] + _log_msg done.\n + [ n = y ] + printf done.\n done. + maybe_break bottom + [ = bottom ] + [ n != y ] + log_begin_msg Running /scripts/init-bottom + [ -x /sbin/usplash_write ] + _log_msg Begin: Running /scripts/init-bottom ... + [ n = y ] + printf Begin: Running /scripts/init-bottom ... Begin: Running /scripts/init-bottom ... + run_scripts /scripts/init-bottom + initdir=/scripts/init-bottom + [ ! -d /scripts/init-bottom ] + get_prereqs + set_initlist + unset initlist + [ /scripts/init-bottom/udev = /scripts/init-bottom/* ] + [ ! -x /scripts/init-bottom/udev ] + [ -d /scripts/init-bottom/udev ] + initlist= udev + /scripts/init-bottom/udev prereqs + tmp= + eval array_udev="" + array_udev= + reduce_prereqs + unset runlist + set -- udev + i=1 + [ 1 -ne 0 ] + oldi=1 + reduce_satisfied udev + render array_udev + eval echo -n ${array_udev} + echo -n + deplist= + unset tmpdeplist + deplist= + eval array_udev="" + array_udev= + render array_udev + eval echo -n ${array_udev} + echo -n + count_unsatisfied + set -- + return 0 + cnt=0 + [ 0 -eq 0 ] + runlist= udev + pop_list_item udev udev + item=udev + shift + set -- udev + unset tmppop + [ udev = udev ] + continue + initlist= + i=0 + [ 0 -eq 1 ] + [ 0 -ne 0 ] + call_scripts + [ = y ] + /scripts/init-bottom/udev mount: mounting /dev on /root/dev failed: No such file or directory + [ -e /conf/param.conf ] + [ n != y ] + log_end_msg + [ -x /sbin/usplash_write ] + _log_msg done.\n + [ n = y ] + printf done.\n done. + mount -n -o move /sys /root/sys mount: mounting /sys on /root/sys failed: No such file or directory + mount -n -o move /proc /root/proc mount: mounting /proc on /root/proc failed: No such file or directory + [ -n /sbin/init ] + [ ! -x /root/sbin/init ] + echo Target filesystem doesn't have /sbin/init. Target filesystem doesn't have /sbin/init. + init= + [ -z ] + [ ! -x /root/sbin/init ] + continue + [ ! -x /root/etc/init ] + continue + [ ! -x /root/bin/init ] + continue + [ ! -x /root/bin/sh ] + continue + [ ! -x /root/bin/sh ] + panic No init found. Try passing init= bootarg. + DEB_1=\033[1;31m .''`. \033[0m + DEB_2=\033[1;31m: :' : \033[0m + DEB_3=\033[1;31m`. `'` \033[0m + DEB_4=\033[1;31m `- \033[0m + LIVELOG=\033[1;37m/live.log\033[0m + DEBUG=\033[1;37mdebug\033[0m /init: line 1: 6: Bad file descriptor + exec [ 6.080127] Kernel panic - not syncing: Attempted to kill init! [ 6.082811] Pid: 1, comm: init Not tainted 2.6.33-grml #1 [ 6.084763] Call Trace: [ 6.085705] [] ? printk+0x14/0x16 [ 6.087255] [] panic+0x48/0xfb [ 6.088853] [] do_exit+0x61/0x5ff [ 6.090356] [] ? filp_close+0x56/0x60 [ 6.092075] [] do_group_exit+0x67/0x8a [ 6.093798] [] sys_exit_group+0x18/0x1c [ 6.095606] [] syscall_call+0x7/0xb