Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 5 for (,msdos5)/boot/grub. => No known boot loader is installed in the MBR of /dev/sdb. => No known boot loader is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: vfat Boot sector type: FAT16 Boot sector info: According to the info in the boot sector, sda1 starts at sector 0. But according to the info from fdisk, sda1 starts at sector 63. Operating System: MS-DOS 6.22 Boot files: /IO.SYS /MSDOS.SYS /COMMAND.COM sda2: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sda3: __________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Debian GNU/Linux 6.0 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: ext2 Boot sector type: - Boot sector info: Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext2 Boot sector type: - Boot sector info: Operating System: Boot files: sdb3: __________________________________________________________________________ File system: ext2 Boot sector type: - Boot sector info: Operating System: Boot files: sdb4: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Debian GNU/Linux 6.0 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: __________________________________________________________________________ File system: ext2 Boot sector type: - Boot sector info: Operating System: Boot files: sdb7: __________________________________________________________________________ File system: ext3 Boot sector type: Grub Legacy Boot sector info: Grub Legacy (v) is installed in the boot sector of sdb7 and looks at sector 66748328 of the same hard drive for the stage2 file, but no stage2 files can be found at this location. Operating System: Debian GNU/Linux 5.0 Boot files: /boot/grub/menu.lst /etc/fstab sdb8: __________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files: sdb9: __________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files: sdb10: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb11: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files: sdb12: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________________________________________ File system: vfat Boot sector type: SYSLINUX 4.04 Boot sector info: Syslinux looks at sector 560 of /dev/sdc1 for its second stage. The integrity check of Syslinux failed. According to the info in the boot sector, sdc1 starts at sector 0. But according to the info from fdisk, sdc1 starts at sector 2048. Operating System: Boot files: /boot/grub/grub.cfg /boot/syslinux/syslinux.cfg /boot/grub/core.img /boot/syslinux/ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 2572 MB, 2572124160 bytes 255 heads, 63 sectors/track, 312 cylinders, total 5023680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 104,831 104,769 6 FAT16 /dev/sda2 104,832 2,209,535 2,104,704 82 Linux swap / Solaris /dev/sda3 2,209,792 5,021,695 2,811,904 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 9,076,724 9,076,662 83 Linux /dev/sdb2 9,076,725 13,398,209 4,321,485 83 Linux /dev/sdb3 13,446,405 25,446,959 12,000,555 83 Linux /dev/sdb4 25,447,021 156,296,384 130,849,364 5 Extended /dev/sdb5 25,447,023 46,411,784 20,964,762 83 Linux /dev/sdb6 46,411,848 66,428,774 20,016,927 83 Linux /dev/sdb7 * 66,428,838 67,119,569 690,732 83 Linux /dev/sdb8 67,119,633 76,887,089 9,767,457 83 Linux /dev/sdb9 76,887,153 82,750,814 5,863,662 83 Linux /dev/sdb10 82,750,878 88,052,264 5,301,387 82 Linux swap / Solaris /dev/sdb11 88,052,328 88,839,449 787,122 83 Linux /dev/sdb12 88,839,513 156,296,384 67,456,872 83 Linux Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 515 MB, 515899392 bytes 12 heads, 54 sectors/track, 1554 cylinders, total 1007616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 1,007,615 1,005,568 6 FAT16 "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 E3E5-0761 vfat /dev/sda2 9a4a976b-e36d-4173-9bd0-54b6a3aed17b swap /dev/sda3 e4019b23-ef26-475f-a809-c5d3280e2975 ext3 /dev/sdb1 5d2a5a81-9c3c-416d-85b8-c2a8ff57f758 ext2 /dev/sdb10 11410ddc-b65b-4209-9462-726094ec569a swap /dev/sdb11 cf9d8693-f1c3-4ee7-bc3a-f5fdfc7d6ff5 ext3 /dev/sdb12 1e4a2d8c-d9af-4b30-8bf1-ca9326410105 ext3 /dev/sdb2 fbfed451-77fa-40c2-a84d-b693e7710214 ext2 /dev/sdb3 189d8de1-b4a7-49dd-ba92-b62241566e12 ext2 /dev/sdb5 d62937b9-1ae2-44cf-9115-a4cb4196abe5 ext3 /dev/sdb6 674935e6-a138-46db-b524-ea621312fc7a ext2 /dev/sdb7 5a7ce861-ed77-4a25-8545-394555039721 ext3 /dev/sdb8 9c982a9f-eb8b-4c69-85d2-7d4c06cb8ad8 ext3 /dev/sdb9 04d31115-b9aa-4118-a38e-7c66dacaa4b2 ext3 /dev/sdc1 2E5E-11F2 vfat ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sr0 /live/image iso9660 (ro,noatime) =========================== sda3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext set timeout=5 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=cyan/blue set menu_color_highlight=white/blue ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-686' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 echo 'Loading Linux 2.6.32-5-686 ...' linux /boot/vmlinuz-2.6.32-5-686 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-686 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode)' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 echo 'Loading Linux 2.6.32-5-686 ...' linux /boot/vmlinuz-2.6.32-5-686 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-686 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-486' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 echo 'Loading Linux 2.6.32-5-486 ...' linux /boot/vmlinuz-2.6.32-5-486 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-486 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-486 (recovery mode)' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 echo 'Loading Linux 2.6.32-5-486 ...' linux /boot/vmlinuz-2.6.32-5-486 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-486 } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Debian GNU/Linux, kernel 2.6.26-2-686 (on /dev/sdb7)" { insmod part_msdos insmod ext2 set root='(hd1,msdos7)' search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-686 } menuentry "Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode) (on /dev/sdb7)" { insmod part_msdos insmod ext2 set root='(hd1,msdos7)' search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-686 } menuentry "Debian GNU/Linux, kernel 2.6.26-2-486 (on /dev/sdb7)" { insmod part_msdos insmod ext2 set root='(hd1,msdos7)' search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-486 } menuentry "Debian GNU/Linux, kernel 2.6.26-2-486 (single-user mode) (on /dev/sdb7)" { insmod part_msdos insmod ext2 set root='(hd1,msdos7)' search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-486 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_otheros ### # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-686 (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-686 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode) (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-686 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-486 (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-486 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-486 (single-user mode) (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-486 } ### END /etc/grub.d/30_otheros ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda3/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 # / was on /dev/sda3 during installation UUID=e4019b23-ef26-475f-a809-c5d3280e2975 / ext3 errors=remount-ro 0 1 # swap was on /dev/sda2 during installation UUID=659834d4-874c-4f17-be39-4268d2cd6be0 none swap sw 0 0 # swap was on /dev/sdb10 during installation UUID=81bf8e6f-f7ea-4048-993f-5b86768c7642 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/scd1 /media/cdrom1 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 -------------------------------------------------------------------------------- =================== sda3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 1.733558655 = 1.861394432 boot/grub/core.img 1 1.756961823 = 1.886523392 boot/grub/grub.cfg 1 1.698719025 = 1.823985664 boot/initrd.img-2.6.32-5-486 4 1.708297729 = 1.834270720 boot/initrd.img-2.6.32-5-686 4 1.710342407 = 1.836466176 boot/vmlinuz-2.6.32-5-486 2 1.712486267 = 1.838768128 boot/vmlinuz-2.6.32-5-686 2 1.708297729 = 1.834270720 initrd.img 4 1.698719025 = 1.823985664 initrd.img.old 4 1.712486267 = 1.838768128 vmlinuz 2 1.710342407 = 1.836466176 vmlinuz.old 2 =========================== sdb5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext set timeout=5 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 insmod png if background_image /usr/share/images/desktop-base/spacefun-grub.png; then set color_normal=light-gray/black set color_highlight=white/black else set menu_color_normal=cyan/blue set menu_color_highlight=white/blue fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-686' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 echo 'Loading Linux 2.6.32-5-686 ...' linux /boot/vmlinuz-2.6.32-5-686 root=UUID=d62937b9-1ae2-44cf-9115-a4cb4196abe5 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-686 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode)' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 echo 'Loading Linux 2.6.32-5-686 ...' linux /boot/vmlinuz-2.6.32-5-686 root=UUID=d62937b9-1ae2-44cf-9115-a4cb4196abe5 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-686 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-486' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 echo 'Loading Linux 2.6.32-5-486 ...' linux /boot/vmlinuz-2.6.32-5-486 root=UUID=d62937b9-1ae2-44cf-9115-a4cb4196abe5 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-486 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-486 (recovery mode)' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set d62937b9-1ae2-44cf-9115-a4cb4196abe5 echo 'Loading Linux 2.6.32-5-486 ...' linux /boot/vmlinuz-2.6.32-5-486 root=UUID=d62937b9-1ae2-44cf-9115-a4cb4196abe5 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-5-486 } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_otheros ### # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sda3. menuentry "Debian GNU/Linux, with Linux 2.6.32-5-686 (on /dev/sda3)" { set root=(hd0,msdos3) search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 linux /boot/vmlinuz-2.6.32-5-686 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro quiet initrd /boot/initrd.img-2.6.32-5-686 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sda3. menuentry "Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) (on /dev/sda3)" { set root=(hd0,msdos3) search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 linux /boot/vmlinuz-2.6.32-5-686 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro single initrd /boot/initrd.img-2.6.32-5-686 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sda3. menuentry "Debian GNU/Linux, with Linux 2.6.32-5-486 (on /dev/sda3)" { set root=(hd0,msdos3) search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 linux /boot/vmlinuz-2.6.32-5-486 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro quiet initrd /boot/initrd.img-2.6.32-5-486 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sda3. menuentry "Debian GNU/Linux, with Linux 2.6.32-5-486 (recovery mode) (on /dev/sda3)" { set root=(hd0,msdos3) search --no-floppy --fs-uuid --set e4019b23-ef26-475f-a809-c5d3280e2975 linux /boot/vmlinuz-2.6.32-5-486 root=UUID=e4019b23-ef26-475f-a809-c5d3280e2975 ro single initrd /boot/initrd.img-2.6.32-5-486 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-686 (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-686 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode) (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-686 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-486 (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-486 } # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb7. menuentry "Debian GNU/Linux, kernel 2.6.26-2-486 (single-user mode) (on /dev/sdb7)" { set root=(hd1,msdos7) search --no-floppy --fs-uuid --set 5a7ce861-ed77-4a25-8545-394555039721 linux /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-486 } ### END /etc/grub.d/30_otheros ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sdb5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 cgroup /cgroup cgroup defaults 0 0 # / was on /dev/sdb5 during installation UUID=d62937b9-1ae2-44cf-9115-a4cb4196abe5 / ext3 errors=remount-ro 0 1 # swap was on /dev/sda2 during installation UUID=9a4a976b-e36d-4173-9bd0-54b6a3aed17b none swap sw 0 0 # swap was on /dev/sdb10 during installation UUID=11410ddc-b65b-4209-9462-726094ec569a none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/scd1 /media/cdrom1 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/sdc1 /media/usb0 auto rw,user,noauto 0 0 -------------------------------------------------------------------------------- =================== sdb5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 13.173343182 = 14.144769536 boot/grub/core.img 1 13.263499737 = 14.241574400 boot/grub/grub.cfg 1 13.213042736 = 14.187396608 boot/initrd.img-2.6.32-5-486 23 13.269187450 = 14.247681536 boot/initrd.img-2.6.32-5-686 7 13.223578930 = 14.198709760 boot/vmlinuz-2.6.32-5-486 2 13.227046490 = 14.202433024 boot/vmlinuz-2.6.32-5-686 2 13.269187450 = 14.247681536 initrd.img 7 13.213042736 = 14.187396608 initrd.img.old 23 13.227046490 = 14.202433024 vmlinuz 2 13.223578930 = 14.198709760 vmlinuz.old 2 =========================== sdb7/boot/grub/menu.lst: =========================== -------------------------------------------------------------------------------- # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 3 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 15 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret password --md5 $1$8QWvL/$kOokF73x9fZKxmMlxZIwf0 # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/hdb7 ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd1,6) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.26-2-686 root (hd1,6) kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-686 title Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode) root (hd1,6) kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-686 title Debian GNU/Linux, kernel 2.6.26-2-486 root (hd1,6) kernel /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro quiet initrd /boot/initrd.img-2.6.26-2-486 title Debian GNU/Linux, kernel 2.6.26-2-486 (single-user mode) root (hd1,6) kernel /boot/vmlinuz-2.6.26-2-486 root=/dev/hdb7 ro single initrd /boot/initrd.img-2.6.26-2-486 ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: Donna hit Enter, Others use top one. root # Other bootable partition config begins title DOS622 (on /dev/hda1) rootnoverify (hd0,0) makeactive chainloader +1 # Other bootable partition config ends # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb2. #title Mandrake Linux (9.0) (on /dev/hdb2) #root (hd1,1) #kernel /boot/vmlinuz root=/dev/hdb2 ro vga=normal #initrd /boot/initrd.img #savedefault #boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb3. #title 2.6.13-15-default SUSE (on /dev/hdb3) #root (hd1,2) #kernel /boot/vmlinuz-2.6.13-15-default root=/dev/hdb3 vga=0x31a selinux=0 resume=/dev/hda2 splash=silent showopts #initrd /boot/initrd-2.6.13-15-default #savedefault #boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, kernel 2.6.33-grml (on /dev/hdb5) root (hd1,4) kernel /boot/vmlinuz-2.6.33-grml root=UUID=bed9e313-783c-4b9a-9ef3-d32347629396 ro vga=791 initrd /boot/initrd.img-2.6.33-grml savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, kernel 2.6.35-grml (on /dev/hdb5) root (hd1,4) kernel /boot/vmlinuz-2.6.35-grml root=UUID=bed9e313-783c-4b9a-9ef3-d32347629396 ro vga=791 initrd /boot/initrd.img-2.6.35-grml savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, LXC, kernel 2.6.33-grml (on /dev/hdb5) root (hd1,4) kernel /boot/vmlinuz-2.6.33-grml-lxc root=UUID=bed9e313-783c-4b9a-9ef3-d32347629396 ro vga=791 initrd /boot/initrd.img-2.6.33-grml-lxc savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, LIDS + LXC, kernel 2.6.33-grml (on /dev/hdb5) root (hd1,4) kernel /boot/vmlinuz-2.6.33-grml-lids2lxc root=UUID=bed9e313-783c-4b9a-9ef3-d32347629396 ro vga=791 selinux=0 capability.disable=1 initrd /boot/initrd.img-2.6.33-grml-lids2lxc savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, LXC, kernel 2.6.35-grml (on /dev/hdb5) root (hd1,4) kernel /boot/vmlinuz-2.6.35-grml-lxc root=UUID=bed9e313-783c-4b9a-9ef3-d32347629396 ro vga=791 initrd /boot/initrd.img-2.6.35-grml-lxc savedefault boot color cyan/blue white/blue # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, kernel 2.6.33-grml (recovery mode) (on /dev/hdb5) root (hd1,4) kernel /boot/vmlinuz-2.6.33-grml root=/dev/hdb5 ro single vga=normal initrd /boot/initrd.img-2.6.33-grml savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/hdb5. title Debian GNU/Linux, kernel memtest86+ (on /dev/hdb5) root (hd1,4) kernel /boot/memtest86+.bin savedefault boot -------------------------------------------------------------------------------- =============================== sdb7/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/hdb7 / ext3 errors=remount-ro 0 1 /dev/hdb12 /home ext3 defaults 0 2 /dev/hdb11 /tmp ext3 defaults 0 2 /dev/hdb8 /usr ext3 defaults 0 2 /dev/hdb9 /var ext3 defaults 0 2 /dev/hdb10 none swap sw 0 0 /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/hdd /media/cdrom1 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/hda1 /mnt/msdos622 auto ro,user,noauto 0 0 -------------------------------------------------------------------------------- =================== sdb7: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 31.869386673 = 34.219493376 boot/grub/menu.lst 1 31.844378471 = 34.192641024 boot/grub/stage2 9 31.904056549 = 34.256719872 boot/initrd.img-2.6.26-2-486 55 31.908124924 = 34.261088256 boot/initrd.img-2.6.26-2-686 51 31.813339233 = 34.159312896 boot/initrd.img-2.6.26-2-686.bak 53 31.877153397 = 34.227832832 boot/vmlinuz-2.6.26-2-486 24 31.826749802 = 34.173712384 boot/vmlinuz-2.6.26-2-686 33 31.904056549 = 34.256719872 initrd.img 55 31.908124924 = 34.261088256 initrd.img.old 51 31.877153397 = 34.227832832 vmlinuz 24 31.826749802 = 34.173712384 vmlinuz.old 33 =========================== sdc1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- ## main grub2 configuration - generated by grml2usb [main config generated at: 1323807527.0] set default=0 set timeout=10 insmod fat if loadfont /boot/grub/ascii.pf2 ; then insmod png set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if background_image /boot/grub/grml.png ; then set color_normal=black/black set color_highlight=red/black else set menu_color_normal=white/black set menu_color_highlight=black/yellow fi menuentry "grml (default)" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off quiet boot=live nomce live-media-path=/live/grml/ bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } menuentry "Memory test (memtest86+)" { linux16 /boot/addons/memtest } menuentry "Boot Grub (all in one image)" { linux /boot/addons/memdisk initrd /boot/addons/allinone.img } menuentry "Boot FreeDOS" { linux /boot/addons/memdisk initrd /boot/addons/balder10.imz } if [ ${iso_path} ] ; then # assume loopback.cfg boot if [ -e /boot/addons/bsd4grml/loopback.0 ] ; then # bsd4grml 20100815 and later menuentry "Boot MirOS bsd4grml" { multiboot /boot/addons/bsd4grml/ldbsd.com module /boot/addons/bsd4grml/bsd.rd bsd module /boot/addons/bsd4grml/loopback.0 boot.cfg module /boot/addons/bsd4grml/loopback.1 boot.1 module /boot/addons/bsd4grml/loopback.2 boot.2 module /boot/addons/bsd4grml/loopback.3 boot.3 module /boot/addons/bsd4grml/loopback.4 boot.4 module /boot/addons/bsd4grml/loopback.5 boot.5 module /boot/addons/bsd4grml/loopback.6 boot.6 } else # old bsd4grml menuentry "Boot MirOS bsd4grml" { multiboot /boot/addons/bsd4grml/ldbsd.com module /boot/addons/bsd4grml/bsd.rd bsd.rd module /boot/addons/bsd4grml/boot.cfg boot.cfg module /boot/addons/bsd4grml/boot.1 boot.1 module /boot/addons/bsd4grml/boot.2 boot.2 module /boot/addons/bsd4grml/boot.3 boot.3 module /boot/addons/bsd4grml/boot.4 boot.4 module /boot/addons/bsd4grml/boot.5 boot.5 } fi else # assume grub.cfg boot menuentry "Boot MirOS bsd4grml" { multiboot /boot/addons/bsd4grml/ldbsd.com module /boot/addons/bsd4grml/bsd.rd bsd.rd module /boot/addons/bsd4grml/boot.cfg boot.cfg module /boot/addons/bsd4grml/boot.1 boot.1 module /boot/addons/bsd4grml/boot.2 boot.2 module /boot/addons/bsd4grml/boot.3 boot.3 module /boot/addons/bsd4grml/boot.4 boot.4 module /boot/addons/bsd4grml/boot.5 boot.5 module /boot/addons/bsd4grml/boot.6 boot.6 } fi menuentry "Boot OS of first partition on first disk" { set root=(hd0,1) chainloader +1 } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - boot in default mode" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - enable persistent mode" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet persistent live-media-path=/live/grml/ bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - copy Grml to RAM" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ toram=grml.squashfs bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - start X Window System" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ startx bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - disable framebuffer" { linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ vga=normal video=ofonly bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - disable Kernel Mode-Setting" { linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ bootid=6bf04911-5e54-41cd-ad02-960f45eced1e radeon.modeset=0 i915.modeset=0 nouveau.modeset=0 nomodeset initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - forensic mode" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ nofstab noraid nolvm noautoconfig noswap raid=noautodetect forensic readonly bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - disable hardware detection" { linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ vga=normal noautoconfig atapicd noapic noacpi acpi=off nomodules nofirewire noudev nousb nohotplug noapm nopcmcia nosmp maxcpus=0 noscsi noagp nodma ide=nodma noswap nofstab nosound nogpm nosyslog nodhcp nocpu nodisc nomodem xmodule=vesa noraid nolvm noresume selinux=0 edd=off pci=nomsi bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initrd /boot/release/grml/initrd.gz } ## flavour specific configuration for grml [grml2usb for grml: 1323807527.0] menuentry "grml - enable debugging options" { set gfxpayload=1024x768x16,1024x768 linux /boot/release/grml/linux26 apm=power-off boot=live nomce quiet live-media-path=/live/grml/ debug bootid=6bf04911-5e54-41cd-ad02-960f45eced1e initcall_debug initrd /boot/release/grml/initrd.gz } -------------------------------------------------------------------------------- ======================= sdc1/boot/syslinux/syslinux.cfg: ======================= -------------------------------------------------------------------------------- TIMEOUT 300 include vesamenu.cfg -------------------------------------------------------------------------------- =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/core.img 1 ?? = ?? boot/grub/grub.cfg 1 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? boot/syslinux/ifcpu64.c32 1 ?? = ?? boot/syslinux/ldlinux.sys 4 ?? = ?? boot/syslinux/syslinux.cfg 1 ?? = ?? boot/syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== boot/syslinux/ifcpu64.c32 : COM32R module (v4.xx) boot/syslinux/vesamenu.c32 : COM32R module (v4.xx) ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown MBR on /dev/sdb 00000000 e9 cd 01 8e d0 bc 00 7c fb fc 50 50 1f 07 8b f4 |.......|..PP....| 00000010 bf 00 06 b9 00 01 f3 a5 ea 1d 06 00 00 80 3e bd |..............>.| 00000020 1e 56 57 50 51 52 e8 99 01 80 fc 02 75 0e 52 2b |.VWPQR......u.R+| 00000030 c0 cd 1a 80 fa 40 5a 73 03 e8 a9 00 5a 59 58 5f |.....@Zs....ZYX_| 00000040 52 51 50 83 f9 03 73 3a 3a 34 75 36 80 fc 02 74 |RQP...s::4u6...t| 00000050 0e 80 fc 03 75 2c 80 fa 80 72 27 2a e4 eb 23 e8 |....u,...r'*..#.| 00000060 2e 00 72 21 e8 f8 00 74 08 e8 fb 00 74 03 f8 eb |..r!...t....t...| 00000070 14 e8 0a 01 8a 74 01 58 e8 15 00 e8 61 01 59 5a |.....t.X....a.YZ| 00000080 eb 06 e8 0b 00 1f 1f 1f 5e 1f ca 02 00 b8 01 02 |........^.......| 00000090 9c 2e ff 1e fc 01 c3 cd 12 be 4c 00 56 2e 80 3e |..........L.V..>| 000000a0 6f 01 02 74 0e e8 f5 00 bf fc 01 b9 02 00 fc f3 |o..t............| 000000b0 a5 eb 03 e8 eb 00 5e c7 04 20 00 89 44 02 0e 1f |......^.. ..D...| 000000c0 e8 e7 00 06 b8 ca 00 50 fb cb 8e c1 8b dc 51 53 |.......P......QS| 000000d0 ba 80 00 e8 ec 00 e8 0c 00 b1 03 ba 81 00 e8 ac |................| 000000e0 ff e8 fb 00 cb 2b c9 41 51 8a 34 e8 9f ff 72 64 |.....+.AQ.4...rd| 000000f0 e8 6c 00 74 5f e8 6f 00 75 21 26 83 bf fa 01 00 |.l.t_.o.u!&.....| 00000100 74 52 26 c7 87 fa 01 00 00 b1 01 e8 48 00 72 44 |tR&.........H.rD| 00000110 41 8a 74 02 e8 76 ff 72 3b 58 51 e8 60 00 e8 be |A.t..v.r;XQ.`...| 00000120 00 46 e8 31 00 4e 72 2c e8 b4 00 51 e8 7b 00 59 |.F.1.Nr,...Q.{.Y| 00000130 52 80 fa 80 73 02 32 d2 26 89 97 dc 00 5a 26 88 |R...s.2.&....Z&.| 00000140 8f da 00 26 c7 87 fe 01 55 aa 59 51 26 88 8f 6f |...&....U.YQ&..o| 00000150 01 e8 02 00 58 c3 8a 34 b8 01 03 e8 32 ff c3 26 |....X..4....2..&| 00000160 81 bf fa 01 19 92 c3 26 81 bf 19 01 50 61 c3 01 |.......&....Pa..| 00000170 00 01 01 00 00 00 02 05 09 0b 03 05 0e 0e 57 56 |..............WV| 00000180 26 8a 47 14 b9 04 00 8b f1 4e 38 84 76 01 74 06 |&.G......N8.v.t.| 00000190 e2 f5 b1 03 eb 04 8a 8c 7a 01 5e 5f c3 48 a3 13 |........z.^_.H..| 000001a0 04 b1 06 d3 e0 04 20 8e c0 c3 56 8b fb be 20 00 |...... ...V... .| 000001b0 03 fe fc b9 dc 01 f3 a4 8b fb 2b f6 b1 03 00 01 |..........+.....| 000001c0 01 00 83 fe bf 34 3f 00 00 00 b6 7f 8a 00 00 00 |.....4?.........| 000001d0 81 35 83 fe ff 41 f5 7f 8a 00 cd f0 41 00 00 00 |.5...A......A...| 000001e0 c1 45 83 fe ff ff 05 2d cd 00 2b 1d b7 00 00 fe |.E.....-..+.....| 000001f0 ff ff 05 fe ff ff 6d 4a 84 01 54 9a cc 07 55 aa |......mJ..T...U.| 00000200 Unknown MBR on /dev/sdc 00000000 66 31 c0 8e d0 bc 00 40 66 50 66 9d 8e d8 8e c0 |f1.....@fPf.....| 00000010 be 00 7c bf 00 06 b9 00 02 56 50 68 49 06 f3 a4 |..|......VPhI...| 00000020 cb 4d 69 72 2d 30 41 41 36 3e 00 62 61 64 20 6d |.Mir-0AA6>.bad m| 00000030 61 67 69 63 0d 0a 00 20 4f 4b 0d 00 b4 0e bb 07 |agic... OK......| 00000040 00 cd 10 ac 08 c0 75 f4 c3 fb bf fe 07 66 31 c0 |......u......f1.| 00000050 ab 40 ab 48 66 ab 66 ab a2 fe 7d bb be 07 b2 80 |.@.Hf.f...}.....| 00000060 eb 07 c0 e0 04 00 c3 eb 14 a0 b7 07 3c 03 76 f2 |............<.v.| 00000070 80 3f 80 74 08 80 c3 10 80 fb fe 72 f3 88 17 be |.?.t.......r....| 00000080 00 50 89 f7 b8 10 00 ab b0 01 ab 58 50 53 ab 31 |.P.........XPS.1| 00000090 c0 ab 66 8b 47 08 66 ab 31 c0 ab ab b4 42 e8 1e |..f.G.f.1....B..| 000000a0 00 5e 5b 53 56 b8 01 02 8b 4c 02 8b 14 e8 0f 00 |.^[SV....L......| 000000b0 be 2b 06 e8 8d ff 31 c0 cd 16 ea f0 ff 00 f0 bd |.+....1.........| 000000c0 04 00 60 cd 13 61 72 14 81 3e fe 7d 55 aa 75 0c |..`..ar..>.}U.u.| 000000d0 be 37 06 e8 6d ff 5e 5e 8a 14 fa c3 60 31 c0 cd |.7..m.^^....`1..| 000000e0 13 61 4d 75 dd c3 00 00 00 00 00 00 00 00 00 00 |.aMu............| 000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001b0 00 00 00 00 00 00 00 00 24 0b 4d 60 00 00 00 01 |........$.M`....| 000001c0 03 02 06 0b f6 f7 00 08 00 00 00 58 0f 00 00 00 |...........X....| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== No volume groups found mdadm: No arrays found in config file or automatically